©2021 Asmuss Group of Companies
| ASMUSS CODE | Size (NB) mm | Flange Pattern | Standards | TEST / APPROVALS | Features |
|---|---|---|---|---|---|
| VBFLAVKD/E050 | 50 | AS/NZS 4087 | Designed according to EN 593 | Hydraulic test according to EN 12266-1, P10/P12 | Ductile iron body with long neck for insulation |
| VBFLAVKD/E065 | 65 | AS/NZS 4087 | Face to face according to EN 558 Table 2 Basic Series 20 | Approved for drinking water / pressure test EN 12266-1 | Anti-blowout 2-stub shaft with uneven hexagon for safe assembly |
| VBFLAVKD/E080 | 80 | AS/NZS 4087 | Lugged Body drilling to AS 2129 table D / AS/NZS 4087 PN16 | Both shafts carried by low friction PTFE coated bearings | |
| VBFLAVKD/E125 | 100 | AS/NZS 4087 | Loose liner of drinking water approved EPDM with reinforced seating area and integrated, profiled flange gaskets. The shaft holes are dimensioned to create compression around the shaft. | ||
| VBFLAVKD100 | 125 | AS/NZS 4087 | Slim disc design with internal hexagon for drive shaft connection | ||
| VBFLAVKD150 | 150 | AS/NZS 4087 | Dew point blocker for heat insulation from lever or wormgear | ||
| VBFLAVKD200 | 200 | AS/NZS 4087 | Anti blow-out plate at the top and a plug at the bottom | ||
| VBFLAVKDG250 | 250 | AS/NZS 4087 | Two POM bearings and an EPDM O-ring at the top as backup sealing | ||
| VBFLAVKDG300 | 300 | AS/NZS 4087 | 350 μm epoxy coating, RAL 5017 | ||
| Lever of high strength reinforced synthetic material with 10 position notch plate (DN 50-200) | |||||
| VBFLAVKE100 | 100 | Table E | Self locking gearbox with handwheel, adjustable end stops and mechanical position indicator (DN 250-300) | ||
| VBFLAVKE150 | 150 | Table E | |||
| VBFLAVKE200 | 200 | Table E | |||
| VBFLAVKEG250 | 250 | Table E | |||
| VBFLAVKEG300 | 300 | Table E |
